Question: What chemicals do you put in a hot tub when you first fill it?

What chemicals should I put in my hot tub for the first time?

This all-in-one kit includes all the essential items you will need to start up your hot tub, including:AquaChek 6in1 Test Strips (50 Strips)Granular pH Minus (2 lbs.)Granular pH Plus (1.5 lbs.)Granular Non-Chlorine Shock (2 lbs.)Liquid Prevent II (16 oz.)Granular Chlor-Aid (2 lbs.)

When can I add chemicals to my hot tub after filling?

Now that your filters are clean and installed, your water is fresh, and your pump is primed, its finally time to add your start-up chemicals. Wait until your hot tub water reaches 80ºF (30ºC) before you add anything. The heat helps the chemicals dissolve and incorporate into the water.

Do I need to shock my hot tub when I first fill it?

It is a good practice to shock with dichlor when you refill your spa. After that, regular maintenance can normally be accomplished with non-chlorine shock. Other times for shock treatment include before or after heavy use and when the spa has been neglected.

What chemicals do I need to keep my hot tub clean?

The basic chemicals for hot tub maintenance include a pH increaser, pH decreased, and sodium dichlor chlorine granules.

Can I use my Lay Z Spa without chemicals?

You can use the spa without chemicals but you would need to change the water more regularly. You would have to check with your doctor to see if the chemicals would affect them. Please note however, the chemicals are very similar to those used in public swimming pools.

When should I shock my hot tub?

The general rule of thumb is to shock your swim spa at least once a week. If its getting a lot more use than usual or several different people are using it, you may want to consider shocking the water twice a week. Just make sure to test the water beforehand and ensure your pH levels are where theyre supposed to be.

Can I use my hot tub without chemicals?

So although you cannot run a hot tub without chemicals, you can run a hot tub without the harsh effects of chemicals with Silk Balance. Please note - you must drain your hot tub and flush out the pipes with Clean Start if you are switching your existing water to Silk Balance for the first time.

When should I drain and refill my hot tub?

With average use, your hot tub should be drained and refilled about once every three or four months.

How do you shock a hot tub for the first time?

To shock your hot tub, simply follow these easy instructions.Adjust the pH levels of your spas water to between 7.4 and 7.6.Remove the hot tub cover so your spa can breathe while being shocked.Turn off the air to the jets but leave the circulation pump running so the water is moving but is not too agitated.More items •May 4, 2016

How often should you shock a hot tub?

once every week It is essential to shock the hot tub frequently – at least once every week. It is important to use Chlorine shocks as well as non-Chlorine shocks. The use of either bromine or Chlorine depends on your personal choice. Shocking the hot tub for cleanliness is not the only reason why you need frequent shocks.

Is it bad to hot tub without chemicals?

But seriously, the real answer is YES! You can run your spa without chlorine OR bromine, and still have a safe and sanitary spa. It requires using some modified methods to make sure that pathogens dont thrive, but it can be successfully done.

Do hot tubs help you lose weight?

Burning Calories in a Hot Tub A daily soak in your hot tub can help you lose weight, even if its in an indirect way. If you weigh around 150 pounds, you can normally burn up to 17 calories or . However, you would need at least 125 days of 15-minute soaking sessions in the morning and evening to lose one pound of fat.

What is the difference between spa shock and chlorine?

The main purpose of spa shock is to break-down organic waste contaminants which cause bad odors and cloudy or foamy hot tub water. If the Free Chlorine level is lower than the Total Chlorine level, it is time to add some spa shock to bring the level of Free Chlorine up to where it needs to be.

What chemicals do I need to put in my spa?

What Hot Tub Chemicals Do You Need?Products to Adjust pH. To keep your hot tub pH in check, you should have a pH increaser and a pH decreaser. Non-Chlorine Shock. A shocking agent releases oxygen into the water, which serves a similar function as chlorine. Sequestering Agent. Sanitizer. Defoamer. Calcium.Aug 4, 2020

How often should I have to add water to my hot tub?

With average use, your hot tub should be drained and refilled about once every three or four months.

How do you clean a hot tub without draining it?

0:000:53How to Easily Clean a Hot tub without emptying - YouTubeYouTube

How long do you have to wait after you shock a hot tub?

How long do I need to wait after shocking my hot tub? There isnt a set period you need to wait before using your hot tub after a shock treatment, however, it is essential to test the water to ensure the chlorine levels are safe. Recommendations vary with ranges between 20 minutes and 24 hours.

Write us

Find us at the office

Kortz- Clang street no. 12, 89735 Prague, Czech Republic

Give us a ring

Alexie Halama
+68 599 734 157
Mon - Fri, 8:00-19:00

Say hello