Installing and Using Quick Connectors Once youve installed these connectors, joining the hoses is simple: Pull the spring-loaded ring on the female connector back. Insert the male connector into the female one and push it in all the way. Release the ring on the female connector to lock the two halves together.

How do I connect 2 garden hoses?

It isnt difficult to figure out how to join two garden hoses together if they already have standard fittings; you just screw the male connector of one hose into the female connector of the other. Moreover, joining hoses is also more difficult if one or both of them lack the requisite screw-on connectors.

How do you connect a hose to a hose?

0:130:59How to Use Hose Connectors - YouTubeYouTubeStart of suggested clipEnd of suggested clipTool push the ring down to lock the connectors. Together disconnect the two ends by pushing backMoreTool push the ring down to lock the connectors. Together disconnect the two ends by pushing back down on the ring and pulling them apart to quickly connect your hose to the spigot attach.

Can you join two flexible garden hoses together?

Summing Up Connecting two expandable hoses is possible and can be as easy as screwing together two opposing ends of two hoses. However, if youre working with two different diameters of hoses or two ends of the same style (male/male or female/female), youll have to use a couple of tools.

How do you join different size hoses?

All you have to do is cut off the threaded part of each hose, measure the diameter from exterior to exterior, attach the coupling (itll slide inside and outside of the hose at the same time to prevent leaks), and hand-tighten it. Do the same for the other hose, and youll be good to go!

Can two hoses be connected?

You can join them instead with a coupler, which consists of a barbed rod that fits inside both hoses and a pair of rings for crimping the each hose onto the rod. Installation is identical to that for for installing a connector. You can use a coupler to join two hoses only if they have the same diameter.

Should soaker hoses be buried?

Soaker hoses come in a roll, which you cut to the desired lengths. As a general rule, its best to limit lengths to 100 feet (30.5 m.)or less to provide even water distribution. When the hose is in place, attach an end cap and bury the hose with bark or another type of organic mulch. Dont bury the hose in the soil.

How much area does a soaker hose cover?

Soaker hoses wet an area 1 to 3 feet wide along their length, depending on soil types. If your soil is heavy in clay, hoses should be spaced 2-3 feet apart for even coverage; loam soils 1-2 feet apart; and sandy soils 1 foot apart. Hose length should not exceed 100 feet.

Can you connect hoses?

You can join them instead with a coupler, which consists of a barbed rod that fits inside both hoses and a pair of rings for crimping the each hose onto the rod. Installation is identical to that for for installing a connector. You can use a coupler to join two hoses only if they have the same diameter.

How do I know what size hose I need?

The only way to measure the inside diameter of the hose is to insert something in one end and measure it instead. If you can slip a 5/8″ dowel into the hose end snug then youll know its size.

How long should I leave soaker hose on?

Start running your soaker hose about 30 minutes twice a week. After a watering day, check your soil to see if the moisture has penetrated several inches, then adjust accordingly. When you find the magic number for your conditions, use a timer to water the same number of minutes every time.