Question: What is the inlet and outlet on a pool?

The water inlet of the swimming pool is the circulating water outlet to regulate the water flow. The pool water is circulated, filtered, heated and disinfected, and then pour into the pool (from the water inlet).

What is a pool outlet?

Water outlets are any pool opening where water goes out of the pool for circulation, some examples are: a.) The skimmer is the place we recommend that you use to vacuum the pool to insure any large debris that may be vacuumed up is caught in the skimmer basket thus avoiding a potential plugged circulation line.

How many inlets should a pool have?

This requires a minimum of two return inlets, but thats in a small pool or spa with a simple shape. Extra fittings should be placed in coves, corners or radius areas where water would otherwise go stagnant.

What does a pool inlet strainer do?

As water is being sucked into the pump, it passes through the strainer, which removes any debris that made its way into the system through the skimmer. Items captured can include small plastic toys, plastic pieces from swim gear, woodchips from nearby landscaping, or, more often, hair and lint.

What is a skimmer inlet?

Pool skimmers are the starting point of pool circulation and act as a gateway to your pools filtration system. Your pool pump sucks water into the skimmers. As the water passes through the skimmer basket, its cleared of larger debris that would cause a blockage if it made it all the way to your pump or filter.

How far should an outlet be away from a pool?

Receptacles for pumps and motors must be located between 6 and 10 feet from the pool walls, and they must be GFCI-protected and locked. Outlet receptacles for general use can be no closer than 20 feet from a pool or in-ground spa if they are not GFCI-protected, and no closer than 6 feet away if they are GFCI protected.

What are the two drains at the bottom of my pool?

During normal operation, water flows to the filtering system through two or more main drains at the bottom of the pool and multiple skimmer drains around the top of the pool. The main drains are usually located on the lowest point in the pool, so the entire pool surface slants toward them.

How do I aim my pool return?

0:261:54Where Do You Aim Pool Return Jets? - YouTubeYouTube

How deep is a stock tank pool?

about 2 feet deep Most tanks are about 2 feet deep, so theyre great for floating and soaking off the summer heat. Some people even hook up their tanks to propane water heaters for year-round swimming, and build entire decks and raised benches around them.

How do you bond a swimming pool?

0:492:13How To Bond A Swimming Pool - YouTubeYouTube

Has anyone ever died from a pool drain?

Theres too much at stake. The vacuum effect in pool drains is powerful enough to hold swimmers, especially children, to the bottom of a pool. Swimmers can die from drowning or evisceration. From 1999 to 2008, according to CPSC data, there were 83 reports of suction entrapment, including 11 deaths and 69 injuries.

Which direction should my pool jets point?

How To Improve Pool Circulation. Its good practice to point your return jets in a direction that will circulate the water in your pool. If your pool only has one jet, point the jet toward the skimmer and downward. This will circulate the water, and push the water at the bottom of the pool to the surface.

Write us

Find us at the office

Kortz- Clang street no. 12, 89735 Prague, Czech Republic

Give us a ring

Alexie Halama
+68 599 734 157
Mon - Fri, 8:00-19:00

Say hello